ITC SPT305, Руководство оператора, Страница: 4 / 19

FRANÇAIS
ENGLISH
FRANÇAIS
ENGLISH
FRANÇAIS
ENGLISH
FRANÇAIS
ENGLISH

Voltage:110V, 60Hz

Current rating: 10.9 amps

Variable speed: 11,500 – 34,000 no-load rpm

Lock-on trigger switch

43.5 mm / 1.7" plunge depth

Tool weight: 3.2 kg / 7 lb.
INCLUDES:

Straigt Guide

Template Guide Insert

Circle Cutting Accessory

Profile Accessory

Dust Extraction Outlet

8 mm Collet Adaptor

Collet Wrench
INSERTING AND REMOVING THE COLLETS AND ROUTER BITS
There are a number of router bits available for cutting various profiles in wood. The
machine is also supplied with 2 collets; 1/4" & 8 mm. Some cutter heads are too
large and do not leave enough space for the dust extraction system. In this case,
a mask should be worn.
WARNING: Disconnect router from the power source before changing router bits
or collets.
To insert the collet:
1. Locate the spindle lock at the front of the router.
2. Press it down and hold it in this position.
3. Using the wrench provided, loosen the collet nut by turning it counter clock-
wise.
4. Remove the collet nut and clean the spindle.
5. Insert the other collet into the spindle and screw on the collet nut hand tight.
SPECIFICATIONS
OPERATING INSTRUCTIONS
!
1. Depth Gauge
2. Lock Knob
3. Shaft Lock Button
4. 7 Position Rotating Depth Stop
5. On / Off Switch
6. Variable Speed Dial
7. Lock-On Trigger Switch
8. Collet
9. Depth Adjustment Lock Lever
FUNCTIONAL DESCRIPTION