ITC PRECISION Series Скачать руководство пользователя страница 2

NOTES

Please avoid using this equipment in the following places:

   -

Exposed to the splashing oil spray, steam, for example, places near the cooker, humidifier, etc.

   -

Unstable surface, such as rocky desktop or oblique plane.

   -

Exposed to overheating environment, such as car with window closed or places with direct sunlight. 

   -

Exposed to high moist environment or places with lots of dust.

Please do not put the power cables near the heater. Otherwise it will lead to melt, cause fire or electric 

    shock.

Please seize the plug when pull out the plug from the AC power socket. Please do not pull the cables 

    directly. Otherwise the power cable will be damaged, to cause fire or electric shock.

Please do not touch the power plug with wet hands, otherwise it will cause electric shock.

There are vent holes on the front and rear panel of this equipment, to avoid the internal high temperat-

    ure. Please do not obstruct these vent holes. Otherwise it will cause fire. Please note, DO NOT:

   -

Put this device side or upside down.

   -

Put this device on poorly ventilated places, such as built-in wardrobe or cupboard bookcase (rather 

         than installing on the matched holder)

   -

Cover this device with tablecloth, or put on carpet or in bed.

Please reserve enough space around this device to keep normal Ventilation. The space should be rese-

    rved: 5 cm on two sides, 10m on the backside, 10 cm on the top. If there is no enough space to keep air 

    flowing, internal temperature of device will rise, and may cause fire.

If you need to Move the position of this devise, please pull out the power plug from AC power socket, 

    and pull out all the cables connecting. Otherwise it will damage the cables, and cause fire or electric 

    shock.

Please do not put this device on the places where may exposed to corrosive gas or salt fog. Otherwise 

    it will cause breakdown.

Содержание PRECISION Series
















Отзывы: