WIFI ANTENNA CONFIGURATION
DATA SHEET
DATA SHEET
CM004-Configuración_wifi_antenna_R0-EN
CM004
NOTE
The GATE is pre-configured by ITC to work directly
with NANOSTATION LOCO M2 configuration.
Go to “Main” tab, and check if signal is stable and
associated. Click on DHCP Client and
if Wifi
Network has assigned an IP Address to Wifi Antenna
check
Connect Ethernet cable between GATE and
NANOSTATION LOCO M2. Turn on the GATE
(With UNIT Controller Connected through USB/RS485)
and wait about 3 minutes
Go to
to see your UNIT connected
http://www.itc-cloud-manager.com
7
8
Enter the Wifi password, if needed,
and click “Change” button
Click on “Apply” button
9
10
11