For warranty information please visit www.itc-manufacturersselect.com/warranty
ITC Incorporated • 3030 Corporate Grove Dr. • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-us.com • Doc #: MSBTR1834 • Revision A: 05.19.20
Battery Powered Table System Install Instructions
(Base Part #: BTR1834 )
Install the table by aligning the table base to the leg and push
down. To ensure the table base is secure to the table leg make
sure the table base goes over the first black piece.
5.
To remove the battery pack, first place the table switch in the off
position. Hold down the red button on the battery pack then slide
the battery out.
To Charge
battery pack, only use the ITC provided battery
charger.
Do not charge battery pack in damp or wet location.
Battery pack should be charged in an environment between 5◦C
- 40◦C (41◦F - 104◦F).
Contact ITC for replacement batteries (part#DCB120-BATTERY) or
charger (part #DCB112-CHARGER).
6.
Install the battery by sliding it into the battery port on the bottom of the table. Turn the switch on.
4.
