8
5.OPERATION
T-218
It will show two deuces plug two digit numbers when
start the machine.
5.1 USAGE WAYS
after two deuces die in 1.5 seconds, it shows one
digit number, it is the zone address code.
Press up and down button to select the number.
1 ZONE BROADCAST
when select , press the console 1-10 zone
to call 1-10 zone.
when select , press the console 1-6 zone to
call 11-16 zone, at the time, console 's 7-10 zone
button can not use.
1
2
2 ALL ZONE BROADCAST
No Matter show 1 or 2, press the all zone button,
means 16 zones of the intelligent control center can
broadcast on/off .
Attention:7-10 zone button can not use.
5.2
ADDRESS CODE SETTING
Press all zone button for a while, then start the
machine, it will show as below
At the time, press 1-10 zone button, then it can show
the setting address code as per order, the before time
number as the ten digit of the address code, the input
number as the first digit of the address code.
Press the all zone button to confirm the input address
code.
ATTENTIONS
: Address code range as 1-16, if wrong
input, take the last time button number as the standa-
rd.
Such as
:
Press No.1 zone button, show
Press No.2 zone button, show
Press No.3 zone button, show
When zone is turned on, line input music will be sent out
automatically.
Press chime button, build-in chime will be sent out auto-
matically.
Press MIC button, start the MIC, then it can broadcast by
MIC.
ATTENTIONS
:
1 When chime or MIC is turned on, wire input music will
be mute automatically.
2 When play music, it needs to turn on the Chime and
MIC, then music can be sent out.
1 MIC STATE LIGHT
Light: means MIC is on
Die: means MIC is off
2 CHIME STATE LIGHT
LIGHT: it means Chime music is sending out
Die: it means Chime music is stopped
3 ZONE STATE LIGHT
Light: it means the zone is off
Die: it means the zone is on
Slowly (interval 0.5seconds) flash:
it means the current
operation is invalid, the called unit is not exist, or wrong
connection of the control wire.
code consoles processing the on or off operation to the
zone.Quickly (interval 0.5seconds) flash:
it will eliminate all the current states. After press the button,
the light flash, means the current operation is invalid, the
called unit is on the busy state, such as:
The other unit is on the broadcasting, or the localbroadcast,
or on the warning state.
Flash very fast when broadcast, means the called unit has
the priority state broadcast insert.
4 TEN ZONES STATE LIGHT
If the current ten zones are on, ten zones state light will
light automatically, or it will die automatically.
When ten zones state light is lighted, press the button
means turn off the current ten zones, or it means turn on
the current ten zones.
5 ALL ZONE STATE
If all zones are on, all zone light will light automatically, or
it will die automatically.
5.3 BROADCAST MUSIC PLAY
5.4 STATE LIGHT
5.5 OPERATION ATTENTIONS
1
Console build-in MPU, turn on/off the internal time should
at least 10 seconds.
2 When connect different unit with Console MIC, please re-
start the machine, or it can't work.
3
When the console connect with the intelligent controller,
then start them, if there is fault for the connection, or the
controller has no power, the console will change to the
state that connect with the paging selector automatically.
4 When the console connect with the intelligent controller,
only the same address code console can process the
synchronous broadcast to the intelligent controller, diffe-
rent address code console turn on the broadcast, the unit
will indicate, the broadcast is busy.
5 Only the console connect with the intelligent controller, the
console address code is useful.
