ITB ARCHIMEDE 5000 Series, Руководство пользователя

Страница: 37 / 65

Archimede 5000 series- FM Power Amplifiers
User’s manual – Page 37 of 65

Working Page
: leads back to the working page as over explained

Set Power Output
: sets the output power (

10.4)

Debug Page
: reads some measurements, checks the knob/digital encoder operation and current alarms (

10.5)

Language
: sets the display language (

10.6)

Set Function, Size
allows to set the master or slave mode, to automatically reduce the power in certain times, to show
the time with the equipment in normal operation, alarm and stand-by mode, etc (

10.710.7)

Set LCD Contrast
: sets the LCD contrast (

10.8)

Set Clock
: sets date and time of the system clock (

10.9)

Info Page
: it shows info about Italab (email, technical support telephone number) (

10.10).
10.4
Set Power Output
menu
Refer to par. 8.1.b in which this menu is already explained.
After you entered the needed power level, don’t forget to confirm it: select
Confirm Changes
and press the knob (or, to quit the
menu without changing the previous setting, select
Ignore Changes
and press the knob). For information about these commands

9.3.
10.5 Debug Page menu
This menu shows some analog measurements (forward and reflected output power, driving input power, bias voltage, temperature
of the heatsink, etc.), checks the operation of the
ON/STAND-BY button and digital encoder of the multifunction knob. It also shows
the presence of a stand-by command coming from the REMOTE connector [14] and any eventual current alarms.
1) Turn the knob counterclockwise in order to move the > cursor to the left of
Debug Page
:
2) Press the knob. The debug page will be shown:

Analog Inputs
: shows the analog measurements (

10.5.a)

Logic Inputs
: checks the operation of the ON/STAND-BY button, if there is an external stand-by command and shows if
one or more alarms are currently released (

10.5.b)

Encoder Test
: checks the operation of the digital encoder of the knob (

10.5.c)

Previous Menu:
leads back to the main menu
10.5.a
Analog Inputs
menu
1) From the debug page (

the previous paragraph), ensure that the > cursor is on the left of
Analog Inputs
menu (otherwise
turn the knob counterclockwise in order to move it to this place), then press the multifunction knob.