iTaste 134 MX-M, Руководство пользователя

Страница: 9 / 10

Step 1:
Place the iTaste 134 MX-M on a flat surface. Carefully unscrew the iTaste 134 MX-M
1st top ring. This will expose the top of the 2nd ring. The 2nd silver ring has the 8
Virtues printed on top with arrows pointing toward the inner pin.
Step 2:
Very carefully lift the 2nd silver ring up from the center pin. This will expose a black
ring with Virtues around the outside and a golden spring with two ball bearings on
top. Do not lose these pieces.
Step 3:
Replace the Golden Spring with the new replacement Golden Spring. Carefully dispose
of the old Golden Spring. Choose your selected iTaste 134 MX-M Symbol. Take the
second ring and place it back over the center pin. Line your selected Virtue and arrow
to point at the selection point at the base of the center pin.
Step 4:
Push the 2 nd ring down very firmly and hold it. You will be able to see the arrow pointing
to the selection point. Hold the 2
nd
ring down firmly and screw the 1
st
top ring back
onto the center post while holding the 2
nd
ring down and in place.
Firmly tighten the 1 st top ring until it is firmly in place.
Technical Specifications:
Battery: IMR high-drain 18650 batteries (Length: 64.40—66.20, 3.7V without
protection).
The iTaste 134 MX-M cannot use 2 stacked batteries.
Output Voltage: Battery voltage onput directly.
EN-13 EN-14