Itasca spirit, Руководство пользователя

Страница: 85 / 106

8-13
SECTION 8
APPLIANCES & INTERIOR FEATURES
COUCH/BED CONVERSIONS
Continental Bed
To Convert Couch to Bed:
1. Remove the backrest cushions from the
couch.
2. Grasp the front edge of the couch and pull
upward and outward from the wall at the
same time.
3. Lift the front edge of the seat cushion and
unfold it toward the wall until it lies flat,
forming a sleeping surface.
To Revert to Couch:
1. Fold mattress forward from the wall to return
the seat cushions upright.
2. Pull the front of the couch upward and push
in toward the wall at the same time until
fully seated against the wall.
3. Place the backrest cushions in their original
locations.
Presto Bed/Shrock Bed
To Convert Couch to Bed:
Pull the front edge of the couch seat upward
and outward from the wall while gently pushing
downward on the backrest until the cushions lie
flat. The bed is now ready for use.
To Revert to Couch:
Push the front edge of the seat toward the wall
while lifting upward on the backrest until the
couch is fully seated against the wall.
DINETTE/BED CONVERSION
To Convert Dinette to Bed:
1. Release the catch on the table leg brace and
fold the leg up against the bottom of the
table.
2. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached
to each dinette bench.
3. Arrange dinette cushions to cover bed area.
To Revert to Dinette:
1. Replace the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into
the floor support bracket and the leg brace is
locked.
FRESH WATER TOILET
The fresh water toilet in your motor home is
very similar to the household type, except that it
is designed to use only a small amount of water
per flush. It uses a high velocity jet of water, pro-
ducing a swirl effect, to efficiently cleanse the
bowl. And since each flush uses fresh water, no
special chemicals are required other than a de-
odorizing agent, if necessary.
Flushing The Toilet
1. To add water to the bowl before using, move
the white lever to the right. Hold lever until
desired level of water is reached. Release
lever slowly - do not allow it to snap back.
Generally, more water is required only when
flushing solids
Push to move
table leg