Itasca latitude 37G, Руководство пользователя, Страница: 96 / 135

SECTION 9 –
FURNITURE AND SOFTGOODS
9-4
SLEEPER SOFA WITH AIR BED
–If Equipped
(Typical view – your coach may differ)
The sleeper sofa features an air bed that
eliminates the uncomfortable center brace
associated with many standard sleeper sofas.
The air bed can be set up quickly and inflated
in about 3 minutes.
Sofa to Bed:
1. Remove sofa seat cushions and set aside.
2. Lift the front edge of the seat frame upward to
remove air bed mattress from its storage area,
or remove the air bed mattress from the box if
this is your first use.
3. Verify the head of the air bed mattress is
outside the sofa storage area before lowering
the seat frame.
4. Verify that the provided hook and loop-
applied attaching straps on the air bed
mattress are attached to the provided fastener
strips behind the front rail of the sofa.
NOTE: This is recommended in order to provide
the necessary safety features that ensure
the air bed mattress does not slip away
from the sofa. This application can only
be done prior to inflation of the air bed
mattress.
5. Unfold the mattress and position it so the
single-layer ‘head’ of the mattress will rest on
the seat frame when inflated as shown.
6. Locate the valve at the foot of the air bed
mattress (this will be on the left side when
facing the air bed mattress.) Close the valve
and the twistable valve cap.
7. Locate the valve at the head of the air bed
mattress (this will be on the right side when
facing the air bed mattress.) Close the valve
but keep the twistable valve cap open.
8. Plug the motorized inflation pump into a
standard 120VAC household outlet.
9. Insert the pump nozzle into the valve and twist
clockwise until pump is engaged and locked.
Allow the pump to inflate the air bed mattress
to the desired firmness.
Twist cap to left and flip
open to expose valve
Inflation Valve