ITALPRESSE 183630114, Руководство пользователя

Страница: 34 / 108

34
8.4 Cleaning the press levels
To ensure good product quality, the levels should always be kept clean. We recommend to carry
out the cleaning operations by using specific tools.
NEVER GET INTO THE PRESS PLATENS; USE SPECIFIC TOOLS.
Clean the hot platens only with proper materials, both chemical and mechanical ones
Don't use cutting tools or mordant products as wooden chisel, crewdriver, metallic spatule, old
metallic brushes, hydrochloric acid, unknown thinners, too much water.
Keep the platens surface with good separator agents.
This may be used also to remove little dirt.
The platens, especially the anodized ones, are easily to be cleaned with a polishing product.
Be careful with alu surfaces; they go easely scored
Always try first to clean with a piece of solid wood.
fig. 7,2