The appliance is identifiable by means of:
- the packaging label
- the Technical Plate
which shows the serial number, the model and the
main technical/performance data.
CONVECTOR units are independent gas appliances
for heating environments.
They use an atmospheric burner with combustion
chamber of the C TYPE, sealed with respect to the
place of installation, offering utmost safety as the
return is prevented of exhaust fumes or fuel into the
environment.
The combustion air is taken from outside the place of
installation and the combustion products are con-
veyed outside by means of the centrifugal fan fitted
to the appliance.
In view of their compact dimensions, the appliances
can be installed in small spaces.
The appliances are factory set for running on NATU-
RAL GAS and can be transformed for LPG
(G30/G31) thanks to the nozzle kit provided as stan-
dard
.
The heat exchanger, consisting of aluminium die
casting with fins, ensures high combustion efficiency.
The tangential fan ensures rooms are quickly heated
up after switch-on.
An electronic board controls all the main appliance
functions and automatically interrupts the gas supply
in case of a fault.
The control panel permits starting or stopping the
appliance in "manual" mode and restoring normal
operation after a fault.
- The remote control permits programming weekly
operating periods, setting the temperature and star-
ting summer ventilation.
6
GENERAL
TERMOCONVETT
ORE
TERMOCONVETT
ORE
DESCRIPTION OF THE APPLIANCE
The appliance features the following safety devices:
- Safety thermostat: this trips and switches the
appliance to stop mode if the temperature in the
exchanger exceeds the set limit (107°C).
- Pressure switch: this trips and switches the
appliance to safety standby in case of faults in the
fume extraction circuit.
- Protection fuse: this protects the electrical parts of
the appliance from any power surges.
The engagement of the safety devices points to a
potentially hazardous appliance malfunction; contact
the Manufacturer's After-Sales Service immediately.
The appliance must never ever be operated with the
safety devices not engaged or tampered with.
The safety devices must only be replaced by the
Manufacturer's After-Sales Service, using only origi-
nal spare parts. Refer to the attached spare parts
catalogue.
To order spare parts and/or perform technical jobs,
the exact model of the appliance must be known.
After making the repairs, perform a start-up test and
check correct operation.
SAFETY DEVICES
IDENTIFICATION
Tampering with and removing the Technical Plate will make it impossible to identify the product with any certainty and
make any installation and maintenance job difficult.
