Italkero ECO SC, Пользователь

Страница: 12 / 20

12
user
• Set the Timer switch to manual;
• Press the heating power selector button:
- MIN = minimum power
- MAX = maximum power
• Turn on the master switch on the control
panel (the power led turns on).
The heater will start up and will run until
it reaches the set room temperature (the
operating led on the control panel will go
out).
• In case of malfunction, the appliance will
go into SHUTDOWN and the red reset led
will turn on. To reset the appliance, press
the RESET button and wait for the startup
process to complete; when it has done so,
the operating led will turn on again.
This operation can only be repeated 3
times. If the heater doesn't start after
three attempts, set the master switch to
OFF and contact Technical Service.
ECO SE