IT Works CPL500W, Руководство пользователя

Страница: 8 / 105

7
Step 1 Connect one end of the RJ45 cable to the LAN interface of the PLC wireless adapter.
Step 2 Connect the other end of the RJ45 cable to your PC.
Step 3 Insert the power plug of the device into the wall socket directly.
Operation Range
The operation range of the PLC wireless adapter depends on the actual environment. The path and effect of signal transmission
may vary with the deployment in a house or an office. In theory, the maximum PLC transmission distance can reach 300 metres.
But for the practical application, the PLC transmission distance may vary due to the number of PLC devices connected to the
power line network. For wireless transmission, straight transmission distance in the open air for some devices can reach 300
meters and indoor transmission distance can reach 100 meters.
Improving the Transmission Performance of Network
In order to improve the transmission performance of network, it is recommended that you insert the power plug of the device
into the wall socket directly. Do not use the patch board.
CONFIGURING THE LAN PC
By default, the DHCP server is enabled. The LAN IP address of the PLC wireless adapter is 192.168.1.1 and the subnet mask is
255.255.255.0 .
Note:
The configuration steps and figures on Windows XP are depicted as an example. The configuration process may vary
depending on operation system of your PC.
To manually set the network adapter on a Windows XP PC, do as follows:
Step 1 Right-click the icon of My Network Places and choose Properties from the menu. The Network Connections window
appears.
Downloaded from www.vandenborre.be