iSys V24 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 27

background image

2

Thank you for selecting the V24 plotter. The employees and management at iSys will
make every effort to assist you with operation of your new plotter. It is our sincere desire
that your ownership experience meets your expectations.

This guide is provided to help you easily install and operate your new plotter. It contains
important information on the features and functions of the V24.

NEED HELP?

If you require additional assistance or information, please contact the iSys Technical
Support team at:

THE IMAGING SYSTEMS GROUP INC.

911 28th Street N.E.
Calgary, AB T2A 7X1
Canada

Phone: (403) 204-5212
Toll Free: 1-866-415-ISYS (4797)
Fax: (403) 204-1971
E-mail: [email protected]

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE. EXCEPT AS PROVIDED BY LOCAL LAW, THE IMAGING
SYSTEMS GROUP INC. (ISYS) MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. ISYS SHALL NOT BE LIABLE FOR ERRORS CONTAINED HEREIN OR
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE
FURNISHING, PERFORMANCE OR USE OF THIS MATERIAL.

Trademarks: Centronics is a trademark of Centronics Data Corp. Veratec is a Trademark
of Xerox Corp.

WARNING:

A WARNING indicates the potential for personal injury.

CAUTION:

A CAUTION indicates the potential for damage to the V24.

NOTE:

A NOTE indicates special attention is required.

«
1
2
3
4
...
»

Содержание V24




























Отзывы:

Нет отзывов

Похожие инструкции для V24

Бренд: Vinyl Express Страницы: 116

Бренд: GCC Technologies Страницы: 58

imagePROGRAF iPF6400

Бренд: Canon Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды