iSys Minimod HD, Руководство пользователя

Страница: 7 / 12

Upgrade
yes(x) no( )
7
6.7 Saving configuration to USB.
After adjusting the settings to the desired specifications, these settings can
then be copied onto a USB drive and stored for future use. The information
can also be used for programming another MINIMOD HD device where
multiple units need to be programmed with the same specifications. To save
this information, press ‘
Menu/OK
’ button and then use the
t
or
u
buttons
to select the
‘save to usb’
option. Press the
p
button to start to start saving process and
then the display will appear
‘success!’
when the procedure is completed.
6.8 Firmware Updates.
This device is capable of being updated with periodic firmware releases.
These can be downloaded from www.antiference.co.uk and installed into
the modulator using the following procedure:
1. Download the appropriate firmware release from the Antiference
website.
2. Copy the ‘jedi.img’ file to a USB memory stick.
3. Turn the Minimod HD off.
4. Insert the USB memory into the USB port at the rear of the Modulator
5. Turn the Minimod HD on.
6. When the OLED display appears ‘upgrade yes ( * ) no ( )’ press the
‘ Menu/OK ’ button
The upgrade procedure will finish after approximately 10 seconds.
CAUTION
DO NOT
turn the Minimod HD
OFF
while undergoing the firmware update procedure as this
may seriously damage the device.
7. DECLARATION OF CONFORMITY
We, Antiference LIMITED herewith declare that the modulator Minimod HD complies with all
essential requirements and any other applicable conditions set forth on directive 1999/05/
CE.
According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do
not dispose of this product as household waste or commercial waste. Waste electrical
and electronic equipment should be appropriately collected and recycled as required by
practices established for your country. For information on recycling of this product, please
contact your local authorities, your household waste disposal service or the shop where you
purchased the product.
Date of issue: October 2014