14
Operating Instructions
•
Make sure that you have fully extended the
FM antenna wire and connected the AM
antenna.
•
Make sure that you have installed batteries
(not included) in the remote control handset.
•
Make sure that the system is connected to an
AC outlet that is always powered.
•
Do not connect the system to an AC outlet
controlled by a wall switch.
General Controls
Most of the main functions of this system can
be operated by the controls on the front panel of
the wireless main unit, or by the buttons on the
remote control handset. If a specifi c function can
only be operated by the remote headset, or by
the front panel controls, this will clearly indicated
in the instructions. In addition, basic playback
and volume controls are provided on the side
control panel of each speaker.
When operating this system with the remote
control handset make sure that IR (Infrared)
transmitter on the front of the remote handset is
pointed at the remote sensor on the front panel
of the main unit. The effective operating range
of the remote control is approximately 15 feet.
Please note that bright sunlight or room lighting
may interfere with the remote control operation. If
the remote is not operating properly try reducing
the brightness of the room or moving closer to
the main unit. If this does not solve the problem,
it may be time to change the remote control
batteries.
Volume Controls
To increase or decrease the system volume press
the
VOL +
or
VOL –
keys located on:
• Remote control
• Wireless main unit control panel
• Left or right speaker control panel
The volume indicator will appear on the display
when you change the volume level. Indication
ranges from 00 to 32 (max).
•
The system remembers the volume
level when the power is switched off and
automatically returns to the same level when
the power is switched on again.
•
This system supports two groups of volume
control for multi-room systems. Please refer
to page 31 (section Speaker Pairing and
Adding Additional Speakers) for more detail.
