Seebacher GmbH
www.seebacher.de
Tel.: 08041 / 77776
Marktstraße 57, 83646 Bad Tölz
Fax: 08041 / 77772
6
Special function DIP switch 1
• Reserve
- Switch must be set to OFF
Parameterisation
In the ISYGLT ProgramDesigner there are various parameterisation options:
• Minimum-maximum values per channel
• Function of the feedback bit per channel
• Definition of the curve calculation
• Definition of the emergency operation
• Setting the dimming curves
• Emergency operation in case of BUS failure
Design
• Plastic housing light grey, snap-on to 35mm DIN rail, 3 HP
10. Technical data
Type designation
DA-04-VX
Article no.
80027003
Operating voltage
18V to 35V DC or 18V to 27V AC
Current consumption
max. 120mA at 35V and full load of the outputs
max. 200mA at 18V and full load of the outputs
Output voltage
4 analog channels, 8 bit resolution 0-10V
Output current
20mA per channel, operation as current source or current sink (total 80mA)
Isolation voltage
300V (subnet / analog outputs)
Subnet (RS-485)
max. 5.6V limitation by Z-diodes
Dimensions
WxHxD 53x90x59mm DIN-rail mounted device (3 HP)
Weight
200g
Connection
Screw terminals pluggable and P-COM connectors
Operating temperature
-10°C to +50°C
Storage temperature
-25°C to +70°C
Humidity
0-85% r. h. non-condensing
Protection class
IP30
CE mark
Yes
