Seebacher GmbH
www.seebacher.de
Phone: +49 (0) 80 41 / 77 77 6
Marktstrasse 57, 83646 Bad Tölz
Fax: +49 (0) 80 41 / 77 77 2
5
Function displays
• 1 flashing yellow LED „BUS“ indicates trouble-free data transfer on the ISYGLT BUS
• 1 flashing green LED „Betrieb“ indicates the processor function:
Steady flashing means „system ok, but no DCF-77 time detected“.
2x short flashing followed by a pause means „system ok and valid DCF-77 time detected“
• 1 red LED „Power“ indicates the operating voltage
Design
• light grey plastic housing, can be put on 35mm DIN rail, 6 HP
Connections
• 1 analog output
• 1 relay output 230V 6.5A
• 1 connection for subnet (BUS A and B, RS-485)
• 1 connection for operating voltage (Ub, 0V)
• 2 P-COM connections (subnet and operating voltage)
• 8 outputs (NPN minus switching against common "+(A)")
• 8 inputs (on a common reference terminal "+(E)")
• 1 connection for programming > USB 2.0 Type-B socket
• 1 DMX512-IN
• 1 DMX512-OUT
Inputs / Outputs
• 1 relay output 230V 1500VA (max. 6.5A) hybrid technology with triac zero voltage switch
• 1 analog output 1-10V, sink current 20mA per channel, coupled with DMX-OUT channel 1 (but freely selectable dimming curve)
• 8 inputs 24V for buttons
• 8 feedback outputs
• 4 rotary potentiometers
• 1 DMX512-IN, 16 freely selectable channels
• 1 DMX512-OUT, 16 freely selectable channels
• 1 RS-485 interface for the subnet BUS
• 1 USB 2.0 Type-B socket for connection to PC / modem for programming
9. Product description
The CC-03-USB has been developed for the implementation of small control tasks. On the hardware side there is a 0(1)-10V interface, a relay
output in hybrid technology, 4 potentiometers, 8 low voltage button connections and 8 low voltage feedbacks, as well as 16 channels DMX-IN
and 16 channels DMX-OUT. With these prerequisites a multitude of small control systems can be implemented. The ISYGLT controller is freely
programmable and can be expanded with the available ISYGLT BUS components.
Application examples for this are:
• Small light controls with 1-4 fixed values adjustable by potentiometer
• LED control via ISYGLT or DMX-512 with adjustment possibilities via potentiometer (brightness, colours RGB, warm white / cold white)
• Sequence controls