NEW PEN and MOUSE Operating Guide.
Holding Pen and mouse
Installation of Receiver
Docking Pen and mouse
1. Plug Receiver into USB Port with Computer
2. If Receiver is possible to use your computer,
Receiver’s LED is flashing one time.
3. Press LED light button (See Page 5)
Check that LED is turn on
IF LED is not on, your Receiver is reverse plugged
Battery indicator
Low battery : Pen’s Led is Flashing
While charging : Pen’s Led is on
Full charge : Pen’s Led is off
When Pen and Receiver is docked,
Automatically power is off.
To restart pen and memory mode,
Press power button
(See page 5)
over 3 seconds
Power Save
1. Goes power down mode without
any action during 30 second.
2. When Pen is docked with Receiver,
goes in to power down
3. Press and Hold
①
button (see page5)
over 3Second, goes in to power down
