Isuzu 2008 N Series, Руководство по ремонту

Страница: 30 / 72

General Information 0A-27
Parts of the CAN-di module [Euro4 specification]
1. Tech2 connection cable
Connects the CAN-di module to the Tech2.
2. DLC connection cable
Connects the CAN-di module to the Tech2 adaptor
2.
Connection method
1. Insert the ISUZU system PCMCIA card into the
Tech2 unit.
2. Connect the DLC cable to the Tech2 unit.
3. Connect the CAN-di module to the DLC cable.
[Euro4 specification]
4. Connect the Tech2 24 V adaptor 2 to the CAN-di
module. [Euro4 specification]
Connect the Tech2 24 V adaptor 2 to the DLC
cable. [Except Euro4 specification]
5. Confirm that the ignition is turned "OFF".
6. Connect the Tech2 24 V adaptor 2 to the vehicle
side DLC connector (pole 16, blue).
RHD model
LHD model
NOTE:
The CNG engine becomes sensitive to fluctuation of
the power voltage when the temperature of ECM unit is
high while or after driving, and communication failures
may occur.
To avoid this situation, input 12 V power supply from a
12 V battery using a battery power cable, separately
from the power for the Tech2 24 V adaptor 2.
• Do not input 24 V battery power supply to the Tech2
unit. Do not use the cigar lighter power supply on
the vehicle side, which is also 24 V.
LNW7Z0SF000501
2
1
LNA7Z0SH003101
16 15 14 13 12 11 10 9
8 7 6 5 4 3 2 1
LNW84CSH001201
16 15 14 13 12 11 10 9
8 7 6 5 4 3 2 1
LGGEN-WE-0871_7th.book 27 ページ ２００９年１０月１日 木曜日 午後３時２６分
mechanikar