iStorage datashur, Руководство пользователя

Страница: 21 / 30

21
iStorage datashur · User Guide
3. How to create a new User PIN
A new encryption key is automatically created under the following circumstances:
• After hacking detection has been triggered by 10 successive failed attempts
to unlock.
• Drive has been manually reset (see heading #9).
When either of the above two scenarios occur, it will be necessary to set a new
User PIN by following the instructions below.
User PIN requirements:
• Must be between 7-15 digits in length
• Must not contain repeating numbers/letters, e.g., (3-3-3-3-3-3-3)
• Must not contain sequential numbers/letters, e.g., (1-2-3-4-5-6-7),
(7-8-9-0-1-2-3-4-5-6), (7-6-5-4-3-2-1)
Instruction Led activity
1. Press and hold button for
3 seconds
Red and Green will illuminate
2. Enter a new User PIN Red and Green illuminated
3. Press button Red and Green blink in unison
4. Re-enter new User PIN Red and Green blink in unison
5. Press button Green blink if 1
st
and 2
nd
entries match
Red and Green blink alternately if PIN
entry error If Red and Green LEDs blink
alternately, restart from step #1
Note: A user PIN can only be defined when the red LED is lit in a constant state or changed
when the green LED is blinking (unlocked). Neither User nor Admin PINs can be created
while drive is connected to a host computer.