© 2008 iStarUSA Inc. All Rights Reserved
727 Phillips Dr. City of Industry, CA 91748
TEL: (626) 303-8885 FAX: (626) 301-0588
6
4. Frequently Asked Questions
Q: Why does the controller show only 1 HD connected, not possible to
make RAID with RAID BIOs? (see below)
A: Please ignore this step.
Due to Silicon Image firmware limitation, you’ll see only ONE HDD via
BIOs -- no matter your
host interface
, Motherboard-built-in or HBA
(host bus adapter), SiI3124 PCI-X or SiI3132 PCI-Express, is RAID or
non-RAID version.
Please just WAIT until
entering the Windows Operating System
.
With non-RAID version, you’ll see all drives installed via DISK
MANAGER.
With RAID version,
Install GUI (Array Manager) software (usually bundled with the
manual/driver CD supplied by
host interface
supplier).
i.e.
You’ll see all disks installed via the software.