Hardware Information: Rear View
D4
40mm cooling fan
D5
Buzzer: Alarm will sound when failure has occurred.
D6
SATA 7-pin data connector
D7
4-pin Molex D-type power connector
BPX-525-SA Installation
Hard Drive Installation
Use key to unlock the door, then pull the handle to open.
Connect SATA 7-pin data cable. one end to the BPX-525-SA and the
other end to a motherboard/controller
1) Install BPX-525-SA to a computer with one 5.25" drive bay available
Slide a 3.5” HDD into the BPX-525-SA, then close the door and lock it.
Included Accessories
• Screws and keys
• 1 SATA cable
2)
2)
Connect a 4-pin Molex connector from a power supply to the
BPX-525-SA.
3)
D7
D4
D5
D6
1)
Adjust Fan Speeds
Press + or - button to adjust fan speed up or down.
Three fan-speed modes:
L = low speed, 2300rpm
M = medium speed, 3600rpm
H = high speed, 4500rpm
* The preset fan speed is H (high speed, 4500rpm)
1)
BPX-525-SA
