Earth
Safe
40 Ah
20 Ah
14,2 ~ 17
24,6 ~ 28
24V/650W
MODEL
12V/650W
Warn
ing
:
Description:
The charge controller is intended only
for charging a battery.
Characteristics :
It is reliable and has a long life.
Short circuit protection.
The charge controller has a brake protection with full battery and has
Charge control and diversion control:
Light ions:
Never connect the charge controller to an
inverter, as this can cause a fire hazard and is
dangerous.
Nominal Output Power
500W
500W
Input Voltage Range
Batter
y
12V
24V
Max. Input wind power
500W
500W
Wind turbine Max. Input
current
Max. Input solar Pv.
150W
150W
Recommended battery
12V / 150 Ah
24V / 150 Ah
Ownconsumption
≤0.2 A
≤0.2 A
Weight
550 gr
550 gr
Size
200 x 115 x 60
200 x 115 x 60
Charge Controller i/HCC 650
Orange
Light Emitting Diode
:
When this is on, it says that the
charge controller is charging (the charge controller is in charge
mode).
R
ed Led
:
If the red light is on, it means that the charge
controller is braking the wind generator. e.g. when the battery
is full or when the wind speed is too high
Step 1
:
Connect the charge controller as it is shown on the battery.
Use a cable connection of least 4 mm² to connect the
charge controller and the battery.
Please be sure to connect the same poles, ie negative to
negative and positive to positive.
Step 1
:
Connect the 3 cables from the wind generator and in the
picture above. The order is unimportant.
You can use this charger for all 3-phase wind
generators or hydropower plants as well as
standard solar systems. Once the battery is fully
charged, the charge controller automatically
brakes.
This charge controller converts AC to DC. It is a
cost effective solution for renewable energy
systems.
This charge controller is suitable for 500W wind
generators and at the same time for 150W solar
systems.
The design ensures e ffi cient ventilation and
efficient operation suitable for AC and wind
generators.
Translation of the original instructions iSTA wind turbine system
2
4
.0
7
.201
8
I00
11 of 28
