LM4X/LMX-DPS User Manual
11
A ¼” cooling line with mating connector is supplied with the dual power supply. This cooling line will connect
directly to the brass fitting. Tighten by hand and then tighten with a wrench ¼ of a rotation. The other end
of the tube has no connector. An appropriate mating connector to fit the supply air can be added to the open
end of the tubing. The nut and ferrule assembly that is supplied on the dual power supply can be added to
the open end of the tube using the instructions shown on page 8.
Cooling Air Supply Line
AC Power
AC input power to the LM4X-DPS is provided via the power inlet connector on the front panel.
A power cable has been provided. Do not substitute the provided cable. If you require a replacement cable,
please consult the manufacturer.
AC Power Cable
The LM4X-DPS has been designed to operate on international power. The allowable input voltage range is
115 to 250 V at 50 to 60 Hz. The power supply is auto-sensing and does not require any change of settings
to operate anywhere in the above range.
