6
REAR PANEL DESCRIPTION
1. LEFT HIGH PASS BALANCED OUTPUT-
This XLR male connector
provides a balanced high pass output from the left channel input. The high
pass frequency is set at 100 Hz with a 24 dB per octave roll off.
2. RIGHT HIGH PASS BALANCED OUTPUT-
This XLR male connector
provides a balanced high pass output from the right channel input. The high
pass frequency is set at 100 Hz with a 24 dB per octave roll off.
3. LEFT FULL RANGE BALANCED OUTPUT-
This XLR male connector
provides a
balanced full range output from the left channel input. This
connector may used to daisy-chain the full range signal to additional powered
sub cabinets such as another XMAX or SA115.
4. RIGHT FULL RANGE BALANCED OUTPUT--
This XLR male connector
provides a balanced full range output from the right channel input. This
connector may used to daisy-chain the full range signal to additional powered
sub cabinets such as another SA 118 or SA115.
5. INPUT PHASE SWITCH-
This switch is used to change the polarity of the
input signal going to the power amp of the subwoofer. This will be dependent
on the placement of the Tripower relative to the subwoofer or if another type
of powered cabinet is to be used. The (0) setting (switch out) will make the
subwoofer phase coherent with any of the Tripower series. This switch will
not change the phase of any of the balanced outputs.
6. INPUT SENSITIVITY-
This control determines the overall input level of the
signal to the power amp section of the subwoofer cabinet. Adjusting this level
will not affect the level of the signal passing through to the full range or the
high pass outputs.
7. LEFT BALANCED INPUT-
This female XLR connector provides an input
for the left channel signal source. This will also feed the left channel signal to
the left high pass and left full range balanced outputs.
8. RIGHT BALANCED INPUT-
This female XLR connector provides an input
for the right channel signal source. This will also feed the right channel signal
to the left high pass and right full range balanced outputs.
9. EXTENTION SPEAKER OUTPUT- Not functional on XMAX
Subwoofer.
10. POWER SWITCH-
This switch provides power to the subwoofer amp
section. Make sure that the input sensitivity control is set to minimum upon
power up
11. POWER INLET MODULE-
This module provides a connection for the
power cord and also houses the mains fuse.
(See Fuse Replacement
Section)
Содержание XMAX 115 Active Series
Страница 1: ...1...
Страница 8: ...8 CONNECTION DIAGRAM...
