Isotta ALPHA 7R/S II, Инструкция по эксплуатации

Страница: 13 / 24

13
The handles of the housing are removable and adjustable in distance from the housing
via optional handl The back door features all key/main camera controls by means of
clearly labelled laser-engraved longlasting buttons. It has a large window anti-scratch
polycarbonate for a fine camera display view and optical viewfinder view.
External viewfinders can be mounted ON REQUEST, INON X-2 compatible.
On the upper top side of the back door there is a leaking
acoustic LED alarm
.
This component acts as an alarm in case of moisture inside the housing.
An internal sensor will turn on the LED red: in the event that this happens consult the
section
CORRECTION OF PROBLEMS.
Both LED and audible sensor are powered by an
internal battery that is replaceable by the user.
The alarm system is protected by a cover.
The back of the housing is entirely detached from the front body to make easier the
camera fitting. To separate the Back from the housing is necessary to first disable the
safety. This is done by applying a slight upward pull to the locking knob located on the
upper part of the housing.
You can then proceed with the removal of the back by turning counterclockwise the knob.
Turn the back until the locking pin is visible. At this point proceed pulling out slightly the
back and extracting on the opposite side the two pins at the bottom from their seat.
The back door is equipped with
two O-ring seals . We recommend to pay particular
attention to them: they must be kept clean, intact and properly lubricated. es
extensions. Depending on the need they extend the space between the handles and the
housing’s body to improve their use even with gloves on.
It is also possible to use the
T-socket
present on the handles to attach various
accessories.
Thanks to a large space allowed for the LCD display it is possible to clearly see images on
the screen, making composing and monitoring shots easy.
The handles of the housing are removable and adjustable in distance from the housing
via optional handles extensions. Depending on the need they extend the space between
the handles and the housing’s body to improve their use even with gloves on. It is also
possible to use the
T-socket present on the handles to attach various accessories.
HANDLES
BACK