Isotra VERRA, Руководство по измерению и сборке

Страница: 11 / 11

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 6. 2017
11
If the winch is used, the roller blind must meet below mentioned requirements.
In the fully extended position, the length of the cord (cords) must be limited (the winch must be positioned as follows):
If the asembly height H0 is not specified, and
i) if the aperture height H is less than or equal to 2,5 m, the length of the cord (cords) H2 must be less than or equal to (see
picture)
: H2 ≤ 1 m.
ii) if the roller blind height H is greated than or equal to 2,5 m, the length of the cord (cords) H2 must be less than or equal
to the screen height minus 1,5 m (see picture
): H2 ≤ H - 1,5 m.
If the assembly height H0 is specified, the distance from the floor to the bottom of the cord (cords) H1 must be at least 1,5
m (see picture): H1 > 1,5 m.