Isotra VERANDA HRV80-ZIP-2P, Руководство по измерению и сборке

Страница: 13 / 41

MEASUREMENT AND ASSEMBLY MANUAL
Document validity: 12.8.2019
.05.2019
13
5. Design
The fabric has zippers on the sides, and if the guide rails are properly installed, these zippers ensure the fabric remains taut in any
position of the bottom section thanks to the strain between the zipper and the guide rails.
Cracking may be heard when retracting the screen, which is caused by the fabric tension and by pushing the air from under the fabric
when winding up. Creases may also form on the zipper side, caused by different material thicknesses and expansion factors.
In blackout blinds, the zippers are placed on the Soltis side of the fabric, not on the side with the blackout film, in order to attain
better adhesion and reduced fabric movement. It is therefore possible that due to wind or if seen at an angle, a small part of the
zipper can be seen, but this is insignificant when compared with the overall view or the fabric tension (reduced creasing).
When the 86/92 fabric is used, the zippers are always on the rear side of the fabric – i.e. on the window side. In addition to placing an
inscription or a logo to the fabric, it is also possible to inverse the fabric colour or the fabric side on the sun screen.
6. Fixtures and fittings
All fixtures and fitting are made from stainless steel, and all accessories are always part of the supply.
Fixtures and fittings for the walls and anchoring to the ground are not part of the supply.
7. Packing
The Veranda HRV80-ZIP-2P is supplied packed in robust cardboard boxes.
8. Use and maintenance
Proper use and maintenance greatly increases the lifetime of the sun screen.

Do not use the screen as protection against rain or wind. If water-proof fabric is used, water will drain to lateral sides of the
lower section. There is no water outlet (gutter) under the rails.

Regular maintenance prevents excessive wear and operational problems.

Cleaning the frame: use soft water instead of aggressive substances that may affect the coating and protective layers.

Cleaning the fabric: when dry, with a semi-stiff brush.

Clean stubborn stains using warm water and light detergent solution, rinse with copious amounts of clean water.

Always let the fabric dry fully before rolling it up (even after an unexpected rain shower).

It is recommended to offer a maintenance contract for the product to the end user.

Does not provide 100% rain protection (rain water may penetrate between the wall and the box).
9. Safety
To ensure safety of the end user, the veranda must be installed in strict accordance with the installation instructions.
10. LED lighting
Optional:
• Remove the aluminium clip section from the lower front side of the box.
• Attach the LED strip to the resulting opening and overlap the opening with a small diffuser section.
• Power supply: 230 VAC / 24 VDC.
• Each part of the box is to be equipped with the LED strip and diffuser, all with own external power supply, and placed
outside the box. IO or RTS or switch (switch is not part of the supply).