Isotech PEGASUS PLUS 1200 B, Руководство пользователя

Страница: 49 / 50

PEGASUS
PLUS
1200
HANDBOOK
ISSUE 5 - 01/05
Page 49 of 50
APPENDIX 3
INDICATOR CONFIGURATION (Reference Only)
Config.INST
Name Description Value
unit Instrument Units `C (0)
dEcP Decimal Places in Display NNN.N (1)
CtrL Control Type PID (0)
Act Control Action REV (0)
COOL Cooling Type LIN (0)
PwrF Power Feedback Enable OFF (0)
Pdtr Manual/Auto Transfer PD
Control NO (0)
FoP Forced Output Enable NO (0)
Sbrt Sensor Break Type SB.OP (0)
rnGH Process Value High Limit 1220.00
rnGL Process Value Low Limit 0.00
Config.IP
Name Description Value
inPt Linearisation Type R.TC (3)
CJC CJC Type (EXT)
imP Sensor break impedance AUTO (1)
Config.CAL
Name Description Value
UCAL User Calibration Enable YES (1)
Pnt1 User Cal Point 1 0
Pnt5 User Cal Point 5 -99.00
OFS1 User Cal Offset 1 0.00
Pnt2 User Cal Point 2 -99
OFS2 User Cal Offset 2 0.00
Pnt3 User Cal Point 3 -99
OFS3 User Cal Offset 3 0.00
Pnt4 User Cal Point 4 -99.00
OFS4 User Cal Offset 4 0.00
OFS5 User Cal Offset 5 0.00