Isotech IDM93N, Инструкция по эксплуатации

Страница: 6 / 31

5
Symbols in this Manual
This symbol indicates where cautionary or other information is found in the manual.
Fuse.

Battery.
1-3 Front Panel
Refer to Figure 1 and the following numbered steps to familiarize yourself with the meter's front panel controls and
connectors.
1. Digital Display — The digital display has a 3-1/2 digit LCD readout (maximum reading 1999) with automatic
polarity, decimal point, overrange and low battery indicators.
2. Rotary Switch — Selects the desired function and range.
3. COM Input Terminal — Ground input connector.
4. V
Ω
Hz Input Terminal — Positive input connector for Volts, Ohms, Diode (Continuity) and Frequency measurements.