iSolution iMove 50, Руководство пользователя

Страница: 6 / 10

10-
display will blink. Use the DOWN and UP button to select the (normal) or (tilt
inversion) mode. Once the mode has been selected, press the ENTER button to setup, to
go back to the functions without any change press the MENU button again. Hold and press
the MENU button about one second or wait for one minute to exit the menu mode.
Led Display
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the (Led on) or
(Led off) mode. Once the mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again. Hold and press the
MENU button about one second or wait for one minute to exit the menu mode.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the MENU button to
show on the display. Press the ENTER button to change to the mode
(display normal), It will automatically store after 8 seconds. Or press the ENTER button
again return to the mode (display inversion). To go back to the functions press the
MENU button. Hold and press the MENU button about one second or wait for one minute to
exit the menu mode.
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Dimmer Calibrate
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to calibrate the dimmer for a maximum output
from (limited to 50% of the really max. output) to (maximum output is not
limited). Once the mode has been selected, press the ENTER button to setup, to go back to
the functions without any change press the MENU button again. Hold and press the MENU
button about one second or wait for one minute to exit the menu mode.
Self-Test
Press the MENU button to show on the display. Press the ENTER button and the unit
will run self-test by built-in program. To go back to the functions press the MENU button again.
Hold and press the MENU button about one second or wait for one minute to exit the menu
11-
mode.
Temperature Test
Press the MENU button to show on the display. Press the ENTER button and the
display will show the temperature of the unit. To go back to the functions press the MENU
button again. Hold and press the MENU button about one second or wait for one minute to
exit the menu mode.
Fixture Hours
Press the MENU button to show on the display. Press the ENTER button and the
display will show the number of working hours of the unit. To go back to the functions press
the MENU button again. Hold and press the MENU button about one second or wait for one
minute to exit the menu mode.
Software version
Press the MENU button to show on the display. Press the ENTER button and the
display will show the version of software of the unit. To go back to the functions press the
MENU button again. Hold and press the MENU button about one second or wait for one
minute to exit the menu mode.
PRO Defaults Setting
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the or . Once the
has been selected, Press the ENTER button and the all the menu mode will be set
to their preset settings (see the grayed boxes) . To go back to the functions without any
change press the MENU button again. Hold and press the MENU button about one second
or wait for one minute to exit the menu mode.
Reset
Press the MENU button to show on the display. Press the ENTER button and all
channels of the unit will return to their standard position.