iSolution iMove 350SR, Руководство пользователя

Страница: 17 / 24

16
4.2 Easy Controller
The easy remote control is used only in master/slave mode. By connecting to
the 1/4” microphone jack of the first unit, you will find that the remote
controller on the first unit will control all the other units in Stand by, and Mode
selection.
Stand By Blackout the unit
Function 1. Sync. Strobe
2. Async strobe
3. Sound Strobe Show
1-­‐4
1. Press to select color
2. Hold to select gobo
Mode Sound (LED OFF) Show (LED Slow Blinking) LED ON
4.3 DMX Controller
By using a universal DMX controller to control the units, you will need to set DMX address from 1
to 512 so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP buttons to change the DMX512 address.
Once the address has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode. Please refer to the following diagram to
address your DMX512 channel for the first 4 units
：
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
15 channels 1 16 31 46
16 channels 1 17 33 49