iSolution iMove 350S, Руководство пользователя

Страница: 8 / 24

7
5. DMX IN:
For DMX512 link, use 3-­‐pin XLR plug cable to link the DMX controller and the fixture, and
input the DMX signal.
6. DMX OUT:
For DMX512 link, use 3-­‐pin XLR plug cable to link the next fixture and output the DMX signal.
7. Fuse (T 6.3A):
Used to protect the fixture from damage of over current.
8. Only For Remote Control:
Used to connect with CA-­‐8 to control the fixture for Stand by, Function and Mode select.
3.2 Main Function
To select any functions, press the MENU button until the required function is showing on the
display. Select the function by pressing the ENTER button and the display will blink. Use the
DOWN and UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup to go back to the functions without any changes press the MENU button
again. Hold and press the MENU button for one second or wait for one minute to exit the menu
mode.
The main functions are on the next page: