10-
test by program. Back to the functions press
MENU
button again.
Master Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
. Once the mode has been selected,
press the
ENTER
button to setup or automatically return to the main functions without any
change after 8 seconds. To go back to the functions without any change press the
MENU
button again.
Fixture Hours
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display will show the number of working hours of the unit. To go back to the
functions press the
MENU
button again.
Software version
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display will show the version of software of the unit. To go back to the
functions press the
MENU
button again.
Reset
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and all channels of the unit will return to their standard position. To go back to the
functions without any change press the
MENU
button again.
4.3 Home Position Adjust
Press
MENU
button for at least 5 seconds into offset mode to adjust the home position, use
DOWN
and
UP
button up to when the function (Focus, Pan, Tilt, Dimmer, Color, Gobo,
R-Gobo) is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to adjust the home position. Once the position has been selected,
press the
ENTER
button to setup or automatically return to the offset functions without any
change press the
MENU
button again, To go back to the main functions without any change
after 8 seconds.
11-
5. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By iLead controller (Please refer to the user guide of iLead) or universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address
setting will be effected at once. Every time you turn the unit on, it will show 200r on the
display and move all the motors to their ‘home’ position and you may hear some noises for
about 20 seconds. After that the unit will be ready to receive DMX signal or run the built in
programs.
5.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other
units to give an automatic, sound activated, synchronized light show. This function
is good when you want an instant show. You have to set the first unit in master
mode
and select
(show 1) or
(show 2) or
(show 3)
or
(show 4) mode. Its DMX input jack will have nothing plugged into it, and
Its master LED will be constantly on and sound LED will flash to the music. The
other units will have to set in slave mode
and select
(normal) or
(2 light show) mode, Their DMX cables plugged into the DMX input jacks
(daisy chain) and the slave led lights will constantly on.
2-light show
In
(slave mode),
means the unit works normally and
means
2-light show. In order to create a great light show, you can set
on the second unit to
get contrast movement to each other, even if you have two units only.
5.2 Easy Controller
The easy remote control is used only in master/slave mode. By connecting
to the 1/4” microphone jack of the first unit, you will find that the remote
control on the first unit will control all the other units; functions press the
MENU
button again.
Stand By
Blackout the unit
Function
1. Sync. Strobe
2. Two-light strobe
3. Sound Strobe
Select Show 1-4
Select Gobo/Color
Mode
Sound (LED OFF)
Show (LED Strobe)
LED ON
