2 Setting up for operation
13
2.4
Connecting
You connect the CCI A3 with the ISOBUS and supply it with current via the
fixed cable on the CCI A3:
Screw the
terminating resistor
to the
in-cab
plug
of the cable.
Plug the
in-cab
coupling
of the cable into the
in-cab
panel connector of the
tractor.
→
The CCI A3 is supplied with power via the
in-cab
panel connector and
starts automatically.
You can connect an extra
ISOBUS participant
to the
plug
of the
in-cab
cable,
e.g. an ISOBUS terminal:
1. Remove the
terminating resistor
from the
in-cab plug
of the cable.
2. Connect the
ISOBUS participant
to the
in-cab
plug
of the cable.
NOTE
Always use the
in-cab
plug
on the fixed cable.
An open
in-cab
plug
can result in the CCI A3 not being found by other
ISO-
BUS participants
.
Plug the
terminating resistor
in at the cable end, if you are not connect-
ing any other
ISOBUS participant
.
