2,4Ghz WIFI FLOOD SENSOR Cod. 67.6800.75
Product description
The HEY WATER sensor works on hard or soft surfaces, on floors and carpets. Easy to
install, simply power it with two AA Alkaline batteries and place it on the floor of the
room to be protected. Ideal for basements, kitchens, bathrooms. When the water
creates conduction between the two detection probes, HEY WATER will activate the
internal buzzer and send notification to the Hey Smart App.
Note: this is only a water detector. will provide timely warning, can not stop the flow
of water.
Tips for positioning
Below is a list of ideal locations for positioning the HEY WATER sensor:
Place a sensor in each room where there are devices such as:
● Washing machines ● Water heater ● Dishwasher ● Toilet
● Sink ● Humidifier ● Ice maker
Note: the detection probes must face the floor.
HEY WATER sensor test
Place a damp cloth between the two detection probes, HEY WATER will
activate the horn (3 beeps then 3Sec. Pause).
If the device does not work, contact your dealer.
Warning: the alarm generated by HEY WATER requires prompt intervention
by the user. Anyone who hears the alarm sound is required to intervene to
avoid damage to objects and people.
Battery life
The average life of the batteries should be around one year.
Low battery warning
If the battery level is too low, HEY WATER will emit an acoustic signal every
32 seconds. Replace the batteries.
Replacement of batteries
1: With a screwdriver, Remove the 2 screws located under the device
2: Remove the battery compartment cover.
3: Replace the batteries with Alkaline Stylus, respecting the correct insertion
polarity.
4: Check that the rubber gasket is well positioned and replace the cover
5: Secure the cover by tightening the 2 screws removed previously
6: Carry out the HEY WATER sensor test to verify correct operation. If the sensor
does not work, check if the batteries have been inserted correctly. If the problem
recurs, ask the store for help
Connection to the Wifi Router
HEY WATER supports the connection to a 2.4GHz WIFI router. In the event of water
leaks, HEY WATER will activate the internal buzzer and send notifications to the Hey
Smart App on the user's smartphone.
