Wrap the kanthal thread on
the middle of the two silica
strings for several laps. This
will create the coil head. It’s
important to leave enough
length of the silica strings in
both ends to reach the
bottom of the atomizer head.
Then your delivery string is
done.
It’s important to leave enough length of the silica strings in both ends to reach the bottom
of the atomizer head (Part A).
Then place the delivery string in the top slot of part A and wrap the ends around the
atomizer head (part A).
Now you must connect the kanthal thread (heating filament) to the positive and negative
pole of the atomizer.
