26 of 36
REGLO ICC - ENGLISH , REV. D, 14-036-E
17.1 Channel stop
This event message is generated when a pumping operation is complete due to the expiration of a time, volume or cycle counter. This event
message is not generated when a stop command is sent to the pump.
Event Code:
X
Data Parameter 1: Channel
Description: The channel that the stop event occurred on.
Range: 1–8
Format: A single character representing the channel number.
Data Parameter 2: Cause
Description: The reason that the stop event occurred.
Format: A single character code representing the cause.
A—Pumping complete (expiration of timer or volume limit reached).
B—Calibration pumping complete.
1—Manual (emergency) stop event (user presses stop button on the pump).
2—Over temperature condition.
3—Over current condition.
17.2 Channel status update
This event message is generated periodically for each channel when the pump is on to indicate that the pump is “alive” and responsive. It is also
responsible for providing updates on the state of an in-progress pumping operation.
Event Code:
U
Data Parameter 1: Channel
Description: The channel associated with this status update event message.
Range: 1–8
Format: A single character representing the channel number.
Data Parameter 2: Status
Description: The current status of this channel.
Format: A single character representing the status.
A—Pumping
B—Paused between cycles
C—Stopped
D—Calibration pumping
E—Calibration pending (waiting for measured value to be entered)
Data Parameter 3: Time remaining
Description: The time remaining in the current cycle. If pumping, this is the amount of pump time remaining. If paused, this is the
amount of pause time remaining.
Units: seconds
Format:
Discrete Type 4
Data Parameter 4: Volume dispensed
Description: The volume which has already been dispensed in the current cycle.
Units: microliters (μL)
Format:
Discrete Type 4
Data Parameter 5: Cycles remaining
Description: The number of cycles left to pump. The current cycle is included in
the count.
Format:
Discrete Type 2
Содержание EW-78001-70
Страница 1: ...Reglo ICC Operating Manual ...
