Ismart HMC-S3003, Руководство пользователя

Страница: 9 / 32

3
DIP Switches Settings
Before operating the camera, set the camera address, DVI-I output signal format and video format
etc through DIP switches. The camera has two DIP switches: SW1 and SW2 as below:
Sw1 Settings
No 1~6 are used to set address for camera, the DIPs adopt binary system. No. 7 is used to set
analog video format. No. 8 is used to set mounting type. Refer to page 22 for details.
Sw2 Settings
No. 1 and 2 of SW2 is used to set protocol; no. 3 and 4 is used to set baud rate; no. 5, 6, 7, 8 is
used to set video output format. Refer to below chart for details:
SW2
DIP No. 1 2
Protocol
OFF OFF VISCA
ON OFF PELCO- D
OFF ON PELCO- P
ON ON Reserved
DIP No. 3 4
Baud Rate(bps)
OFF OFF 2400
ON OFF 4800
OFF ON 9600
ON ON 38400
DIP No. 5 6 7 8
Video
Format
OFF OFF OFF OFF 1080p60
ON OFF OFF OFF 1080p50
Default Settings
Address 1
Baud Rate 9600bps
Protocol VISCA
Video Format
1080
i
50
Analog Video Format YPbPr
Mounting Type Stand

Note
SW1 is used to set address, video output
and mounting type, SW2 is used to set
protocol, baud rate and video format.