Ismart AMCE220NV3, Руководство пользователя, Страница: 26 / 45

20
Please refer to the above diagram, user and the camera are in different routers, they are
considered as in a WAN; in this condition, application software iSmartCMS can not search and find
the camera automatically. User can still connect after below conditions are satisfied: (1) Set
camera’s IP address as static IP address (2) Router of the LAN where camera is connected
supports Port Mapping. (3) Router of the LAN where camera is connected has fixed public IP
address. Follow below steps to connect:
Step One
Set camera’s IP address in LAN: connect user PC to the LAN (Router 1) where the camera is
connected according to LAN connection instructions, use application software iSmartCMS to
search and find the camera, then add it to manage; then set camera’s IP address in the same
network segment as the router 1. Camera’s gateway is usually set at Router 1’s LAN IP address,
for example, 192.168.1.1, then camera’s IP address can be set as for example 192.168.1.179 or
192.168.1.180 as long as they are in the same network segment.
Steps Two
Route Mapping: User PC logs into router configuration menu, gets into “Port Mapping” (router
management authorization may be required); refer to below picture, DO NOT tick “Do not apply this
rule”, from first frame under “External port”, input any number from 1~65535, but preferred to be set
at more than 10000 like 10200 so there will be less port conflict possibility. From “Internal IP”, input
the camera1’s IP address 192.168.1.179, from first frame of “Internal Port”, input 3478, (all
cameras use this same port number). “Protocol” and “Mapping Line” can be default, from “Note”,
input “Camera 1’s mapping port” or something to understand.