iSMA-B-FCU Quick Start-up
www.ismacontrolli.com
DMP245en | 1st Issue rev. 1 | 04/2022
page 16 of 56
3.8 Step 7: Selecting the Temperature Control Value Source and its
Connection Details
The temperature control value source has to be specified with the DIP switches 5 and 6.
By default, the
sensor’s
type, served by the
controller’s
inputs S1 and S3, is the 10K3A1
NTC.
The temperature sensor type can be changed using the iSMA Tool software.
Figure 9. FCU connectors
3.8.1 Temperature Source: iSMA-B-LP/Touch Point Room Panel
Figure 10. The LP/Touch Point room panel set as a temperature source
3.8.2 Temperature Source Connected to S3
