4
ASSEMBLY
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
READ ALL SAFETY WARNINGS BEFORE USE.
Assembly Instructions
Open folded stand (C) by pushing down each leg.
Place Leg Clip (C1) over each stand corner (Figure 1).
Insert end of Leg Clip (C1) into Stand Slot (C2) (Figure 1).
Push down Leg Latch (C3) to securely lock leg in place (Figure 2).
Ensure each leg is securely locked in position.
Place Fire Bowl (B) on assembled stand.
Place Spark Screen (A) on Fire Bowl.
Step 6
Step 7
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
READ ALL SAFETY WARNINGS BEFORE USE.
Assembly Instructions
Open folded stand (C) by pushing down each leg.
Place Leg Clip (C1) over each stand corner (Figure 1).
Insert end of Leg Clip (C1) into Stand Slot (C2) (Figure 1).
Push down Leg Latch (C3) to securely lock leg in place (Figure 2).
Ensure each leg is securely locked in position.
Place Fire Bowl (B) on assembled stand.
Place Spark Screen (A) on Fire Bowl.
Step 6
Step 7
STEP 1:
Open folded stand (C) by
pushing down each leg.
STEP 2:
Place Leg Clip (C1) over each
stand corner (Figure 1).
STEP 3:
Insert end of Leg Clip (C1) into
Stand Slot (C2) (Figure 1).
STEP 4:
Push down Leg Latch (C3) to
securely lock leg in place
(Figure 2).
STEP 5:
Ensure each leg is securely
locked in position.
STEP 6:
Place Fire Bowl (B) on
assembled stand.
STEP 7:
Place Spark Screen (A) on
Fire Bowl.
INSTALLATION AND ASSEMBLY
CARE AND MAINTENANCE
• Fire bowl may be cleaned with water and mild detergent.
• Fire bowl will change colors after use.
• Carry case can be cleaned with damp cloth and mild detergent.
• Do not use abrasive detergents or pads to clean bowl.
• As with any outdoor grill, periodic maintenance is required to return painted steel surfaces to
original appearance. Remove any rust with sandpaper or steel brush and repaint with grill paint
suitable for high-temperature surfaces. Follow manufacturer’s instructions.
• Maintenance is required before or after every season of use.
FIGURE 1
FIGURE 2
C1
A
B
C
C2
C3
