44
[email protected] | +49 921 150845-0
The functions can be locked with the key.
When the nursing staff is absent, the operating elements must be locked!
6.4
Operating the brake castors
The bed should always be braked at the place of installation with the help of the castor brake.
Figure 10: Exemplary castors in braked and unbraked condition
6.5
Patient lifting pole with handle
There is a mounting for the lifting pole on both sides of the lying surface at the head of our care beds.
When fitting the lifting pole, ensure that lifter tube with the metal bolt is pushed far enough into the
socket bushing so that the metal bolt is fully located in the recessed slot on the socket bushing. Thus
the lifting pole is fixed in its position and can not be swung out over the lying surface (cf. Figure 11)
The included grab handle is used for the user to stand upright and can be individually adjusted to the
correct height with the webbing.
Figure 11: Patient lifting pole mount at the head end
The lifter is not suitable for therapeutic purposes.
The maximum load capacity of the lifter is 75 Kg
The metal bolt on the lifter tube must always be located in the recess slot. Danger of toppling
over!
!
!
!
!
