iSIS Graham-Patten SoundPals DMIX-41, Руководство пользователя

Страница: 10 / 24

DMIX-41 User Guide
Page 4
The figure below illustrates the DMIX-41’s front panel:
DMIX-41 DMIX-41
+6V
MASTER
5 4
3 2 6
AES OUT
1
CONTROL
ERROR
1
2
1
2
3
4
3
4
1) AES Balanced Output — provides AES balanced output via XLR connector. Output is
concurrent with the unbalanced output (BNC) — both can be used simultaneously.
2) AES Unbalanced Output — provides AES unbalanced output via BNC. Output is
concurrent with the balanced output (XLR) — both can be used simultaneously.
3) Remote Control — provides remote channel muting, and timing master selection. Refer
to the “ DMIX-41 Remote Control ” section for details.
4) Indicator LEDs — eight indicators are provided:
ERROR — four red LEDs are provided, one for each input. The following LED conditions
are possible:
•
An ERROR LED lights when no signal is applied to the input, or when the signal
is not valid . A non-valid signal exhibits errors such as format violations, bit
errors, low level, or incorrect frequency.
•
An ERROR LED blinks slowly when that input has been muted via the remote
control interface.
•
When an input ERROR LED is lit (either continuously or blinking), the input signal
is muted.
MASTER — four green LEDs are provided, one for each input. The following LED
conditions are possible:
•
A MASTER LED lights continuously when the input signal may be used as the
output timing reference.
•
A MASTER LED blinks slowly when that input signal is in use as the output
timing reference.
•
A MASTER LED is off when that input has been disabled as a timing master (via
remote control).
5) Power Connector — accepts the power jack from the 6 VDC power supply. Refer to
“External Power” for more information regarding external power.
6) Power LED — the large green LED below the power jack lights when power is applied.