1
1. Introduction
Thank you for choosing the iSimple TranzIt™ as your audio input solution. The TranzIt™ is
designed to provide the connecting link between your portable audio device and your FM
radio. Using the supplied accessories, you can connect virtually any audio source into any FM
equipped radio. This interface has a universal 3.5mm input that can be configured to accept an
audio signal from any source.
The TranzIt™ will route the audio from your device through your factory radio. If your audio
source is an iPod, iPhone, or iPad featuring a docking connector, this interface will also
provide battery charging when connected.
2. TranzIt™ Components
• One Radio Input Interface
• One 3.5 mm to 3.5 mm Audio Cable (4ft)
• One 3.5mm to Audio Input Adapter
• One Power Cable with On/Off Switch
• One Audio/Video Cable with Audio Input Adapter (6ft) for iPod, iPhone, or iPad
• One “Factory Look” 3.5mm Dash Panel Mount Audio Input Cable (6ft)
3. Installation Options
(Choose A or B)
A. Connecting an iPod, iPhone, or iPad
iPod Specific installation instructions
1) Connect the audio connector from the docking cable to the audio input on the TranzIt.
2) Connect the two-pin power connector on the docking cable to the connector labeled
“Connect to iPod” in the TranzIt wiring harness.
3) The Yellow connector from the docking cable is intended for video playback from an
iPod, iPhone, or iPad that support this function. Route this video connection to any display
that is not in view of the driver while operating the automobile.
4) Route the connector for iPod, iPhone, or iPad to your chosen location in your automobile.
Common locations are the glove box, center console or in a mounted cradle for iPod, iPhone,
or iPad. You will need to access the iPod, iPhone, or iPad in order to change music selections.
Antenna Out *
Antenna In *
Connects to
On/Off Switch
3. Connecting a source with RCA outputs
Audio Cable
(5 ft.)
Fuse
Fuse
Antenna Out *
Antenna In *
Connects to
On/Off Switch
Fuse
3.5 mm to 3.5 mm
Audio Cable (4 ft.)
“Factory Look”
3.5 mm
Dash/Panel Mount
Audio Input Cable (6 ft.)
3/8” Hole
RCA to RCA
(not included)
Antenna Out *
Antenna In *
PURI
Connects to
On/Off Switch
Fuse
audio source
(not included)
MP3
(not included)
iPod, iPhone, or iPad
(not included)
* Some radios require the addition of antenna connection adapters
Connect To
SWITCH
Connect To
iPod
Connect To
SWITCH
Connection for iPod
Not USED
Connect To
SWITCH
iPod Conection
Not USE
Audio Source
(not included)
OR
Header Plug
TranzIt
Connects to
iPod, iPhone, or iPad
3.5 mm to Audio Input
Adapter
TranzIt
