iSimple a Division of AAMP of America
®
| Clearwater, Florida 33760 | Ph. 866-788-4237
[email protected] | www.iSimpleSolutions.com
©2014 AAMP of Florida, Inc.
Rev. 100214
CarConnect
Smartphone Integration Interface
Installation/Owner’s Manual
Page 2
Page 3
Satellite Radio Operation
Selecting Bluetooth as a Source
Press the AM-SAT or SAT button to enter the Satellite Radio source. If the vehicle is equipped with Satellite
Radio, press the button until SAT3 is displayed. This is where the CarConnect source is located. SAT1 &
SAT2 will still function as normal with the vehicles Satellite Radio. If the vehicle is not equipped with Satellite
Radio, SAT1, SAT2 & SAT3 is where the CarConnect source is located.
**PLEASE NOTE: If your factory SWC’s track buttons change presets, you will need to press and
hold them to initiate any CarConnect function
Pairing/Connecting Your Phone
When the CarConnect has been installed for the first time, or whenever you clear all paired devices, it will
be automatically discoverable. Open up your phone’s Bluetooth menu and search for devices. Once you
see “Car Connect 3000” in the list, select it. Your phone should pair and then connect with the interface. The
CarConnect will alllow up to 4 devices to be paired at once.
Make Discoverable
Press Preset 5 five times within five seconds while in Bluetooth mode to make the CarConnect discoverable.
The radio will display “Ready to Pair”.
Switch to Next Device
Press Preset 3 to switch to the next device. Devices are sequenced by the order in which they were paired.
The CarConnect will always try to connect to the last device paired when the key is cycled. If that device is
not present it will look for the next device in line.
Clear All Paired Devices
Press Preset 2 five times within five seconds while in Bluetooth mode to clear all paired devices. The radio
will display “Clear All”.
Adjusting the CarConnect Output Gain
While in CarConnect mode, press Preset 4 to enter gain adjustment mode. Within 5 seconds press either
Preset 5 or Preset 6 to adjust the gain. Preset 5 lowers the gain and Preset 6 raises the gain.
HFP Controls
Answer Call
Press the Track Up button on the radio or the SWC to answer an incoming call
End Call
Press the Track Down button on the radio or the SWC to end a call
Reject Call
Press the Track Down button on the radio or the SWC to reject an incoming call
Privacy
Press the Track Up button on the radio or SWC to switch the call over to the handset. Press again to return
to the Bluetooth kit.
