ISIC PCM4-Q87, Руководство пользователя

Страница: 5 / 17

User Manual PCM4-Q87 version P/N: 07355-000 Rev B Page 5/16
1 General considerations on Installation and
Operation
The PCM4-Q87 is designed to work at conditions according to IEC 60945. However, keeping
the temperature and vibration level at a minimum will extend the life time of the product. ISIC
recommend operating this product at normal room temperature (20-25 °C), with the lowest
level of vibration and humidity.
Installation of the PCM4-Q87
When designing the cabinet/console for the PCM4-Q87, please ensure that air can flow freely
around the cabinet, in order to avoid any unnecessary rise in temperature. If it is not possible
to have an adequate natural airflow, use a fan to force the airflow to be higher.
2 Getting started
Please refer to the PCM4 overview for location of connectors specified in this section.
Connect Keyboard/Mouse to the connector specified in
PCM4 overview or connect to the USB
connectors.
Connect the monitor to the VGA, DVI, HDMI or DisplayPort connector.
Connect all other needed connectors ending with the Power outlet.
Press the ON/OFF button to “I” position.
To power up the PCM4, you need to press the power button on the front (dependant on BIOS
setting). Use a pencil or similar for that purpose.
The PCM4 will be in standby mode when you power down. To restart the PCM4 again, use a
pencil on the power button.