5. USER OPERATION
5.1
SWITCHING SCALE - ON / OFF
The scale is switched ON / OFF by pressing
the Power BUTTON: This button is used to
switch on and switch off the scale. It is a real
ON/OF which is implemented using the
latest technology so that there is absolutely no power consumption when the
scale is switched off.
USAGE :
a) SWITCH ON:
Press the button once, the scale will switch on.
b) If the scale is already switched on, press the button again,
display will show “SEE YOU SOON” and switch off after
sounding a beep.
Note :
Make sure the weighing pan is empty before turning on the scale.
5.
5.2.1
TARE BUTTON
This button is
used for taring a weight to
display 0.00. A Tare value is
indicated by the “t” LED on the
panel.
Place a container on the
weighing pan (say 200g), then
press the TARE button. The
weight is tared and the
machine will display zero and
the tare LED will be ON. To
recall the tared weight, simply
press the TARE button again. To
TARE the value, again press the
TARE button.
5.2.2
RIGHT ARROW KEY :
This is used to shift selected digit on right side
while entering settable values or calibration weight or any other user
parameter etc.,
2
MANUAL TARE
ITA Series – Table Top Precision Weighing Balance
ITA Series – Table Top Precision Weighing Balance
6.3
CAPACITY DISPLAY SETTING :
When the scale is switched on, the
display shows the Capacity and
Accuracy of your scale scrolling,
you can change this setting
through this function that the
Capacity and Accuracy of your
scale should be shown or not at the
time of switching on the scale. Press and Hold the “MODE” button and
switch on the scale, display shows “CAP”. Now press the enter / zero
button and the display shows “YES”. Now select between “YES” or
“NO” option by pressing the TARE button and then press the zero
button 7 times to accept it, if you select “YES” the capacity & accuracy
of the scale will be displayed if “NO” it will not be displayed.
6.4
UNIT MODE DISPLAY SETTING :
This function helps you to access
the two different weighing modes
that is CARAT & TOLA. You can
deactivate any I or both of the
above mode in which you do no
want to weigh and carry on with
gram mode only. Press and Hold
the “MODE” button and switch on the scale display will show “CAP”
now press ZERO button 2 times and the display shows “CARAT”. Press
the Zero button once and select between “YES” or “NO” bu pressing
the TARE button and press the Zero button 3 times to accept it. By
selecting “YES” the weight will be displayed in that particular mode
which you have selected as yes by pressing the mode button while
weighing and if selected as no the weight will not be displayed in that
particular mode.
4
9
