Isgus Perfect 2020, Руководство по эксплуатации и установке

Страница: 23 / 52

Getting Started 17
Program symbols
Language identification
Time recorder print formats
Card lift / line change
Time card parameters
Column change
The programming of individual customer requirements with the above mentioned
program symbols is carried out by your local dealer. For further information e-mail
us at:
support@ca.isgus.com
or
techsupport@isgus.com
R
→
Change the displayed value
A value can be changed when flashing in the display. If the key is
pressed once, the value will be increased by one. If the key is
pressed continuously the value increases in fast mode.
E
→
Confirm the values entered.
Use this key to switch to the next value or next digit in the current
menu item.
S
→
Skip to next parameter or menu item.
If not all required values are entered for a menu item, the " S " key will
not move you to the next.
→
In normal operation column selection by position key
Programming-LEDs
1 2 3 4 5 6 7
The seven LEDs are for weekday programming.
Each flashing LED represents the day for which the
necessary change timing needs to be programmed.
LED 1 = Monday to LED 7 = Sunday.
Digital display
. . . . . .
D1 D2 D3
→
Separated into the fields D1, D2 and D3.
When the unit is closed, only field D3 is visible.
→
In normal operation the current date is displayed.
The decimal point flashes always. In case of DCF-
connection or slave clock function it goes off with no
reception.
→
In programming mode the active digit is marked by a
flashing LED. A flashing LED indicates that the displayed
value can be changed.